Installation Guide

Easy setup in 15 minutes - no professional installation required

Before You Begin

Installing your HAIMMY electric infrared patio heater is straightforward and requires only basic tools. Please read all instructions before starting installation.

Tools You'll Need

Phillips head screwdriver
Measuring tape
Level (for wall-mounted models)
Pencil for marking (wall-mounted models)
Power drill with appropriate bits (wall-mounted models only)

Safety First

Important: Ensure the heater is unplugged during installation. Only connect to power after assembly is complete and you've verified all connections are secure.

1️⃣

Unbox Carefully

Remove heater and components. Check all parts against the included parts list.

2️⃣

Choose Location

Select a stable, level surface at least 3 feet from walls and combustible materials.

3️⃣

Assemble Base

For stand models: attach base plate using provided screws. Tighten securely.

4️⃣

Mount Bracket

For wall-mounted models: use level to mark mounting holes, drill, and secure bracket.

5️⃣

Attach Heater

Slide heater onto base or wall bracket until you hear a click indicating it is locked.

6️⃣

Test Operation

Plug into standard 110V-120V outlet and test all heat settings before regular use.

Electrical Requirements

All HAIMMY patio heaters operate on standard household current:

Voltage: 110V-120V AC
Power: 1500W maximum
Plug Type: Standard 3-prong grounded plug
Circuit: Dedicated 15A circuit recommended

Warning: Do not use extension cords. Do not plug into outlets with other high-wattage appliances.

Positioning Guidelines

Minimum 3 feet clearance from walls, furniture, or flammable materials
Do not position directly under low-hanging structures
For outdoor use: ensure outlet has GFCI protection
Place on stable, level surface to prevent tipping

Need Installation Help?

Our support team can walk you through the process or troubleshoot any installation issues.

Get Help